Skip to content
Basics

Interactive Exploded View: Hotspots, Parts List and Cart in the Shop

An exploded view shows an assembly pulled apart: every part in its place, each with a position number. It's been the standard in printed spare parts catalogs for decades. In an online shop it becomes interactive, and with that, the shortest path from a broken part to an order. This article shows what an interactive exploded view needs to do, and how it gets into a Shopify shop.

6 min read Last updated:

What an Exploded View Is

An exploded view shows the parts of an assembly as if they'd been pulled apart along their direction of installation. Every part carries a position number. That number points to the bill of materials, which lists what the part is called, its SKU, and how many times it appears in the assembly.

That's ideal for selling spare parts, for two reasons:

  • The customer recognizes instead of describing. They don't need to know the part is called a “spacer sleeve”. They see it in the drawing, in exactly the spot where it sits on their machine too.
  • The neighbors are right there in the picture. Anyone replacing a water pump usually needs the gasket next to it too. That's obvious in a drawing; it isn't in a product list.

Static or Interactive: The Difference in the Shop

Many shops show exploded views as an image or a PDF. That's better than nothing, but it leaves the actual work to the customer:

Step Image or PDF Interactive Drawing
Find the part Read the number, search the list click the hotspot
Price and stock look up separately right on the hotspot
Order copy the number into the shop search straight from the row to the cart
Quantity count it yourself required quantity pre-filled
Detail zoom in on the PDF zoom and full screen in the shop

Every one of these steps is a chance to grab the wrong part, or give up. An interactive drawing takes them off the customer's hands.

Hotspots: The Points on the Drawing

A hotspot is a clickable point at the spot where the part sits in the drawing. For it to work well in everyday use, a few details matter:

  • The same number as on paper. The hotspot carries the drawing's own position number, not a freshly invented count. That way it matches the manual the customer might already have in hand.
  • Legible even with long numbers. Some catalogs don't number 1, 2, 3, but use manufacturer numbers like 49193. A good hotspot grows with its label: short numbers stay a circle, long ones become a pill shape.
  • Adjustable size. Densely labeled sheets need smaller hotspots than spacious ones. Hotspot size should be adjustable globally and per drawing.
  • Parts used more than once, combined. If the same hotspot appears four times, say a screw, it's listed once and marked “4× in the drawing”.
  • A product card at the hotspot. Hovering or clicking brings up a card with image, name, price, quantity selector and an add-to-cart button.

The Parts List Belongs With It

The drawing alone doesn't sell anything yet. The parts list sits beside it, and the two are linked: clicking a hotspot brings its row to the top and highlights it, clicking a row marks the hotspot. Every row shows what the customer needs to decide:

  • Position number and name
  • SKU and OEM number
  • Price, optionally with a struck-through compare-at price
  • Stock: in stock, out of stock, sold out
  • required quantity and a free-text note per position
  • Variants and alternative products, such as different pack sizes
  • Quantity selector and add-to-cart button

A search box above the list filters by name, SKU and OEM number, as a substring: typing 341005 also finds 00341005.

Not every customer needs both at once. That's why there are four views: drawing and list side by side, the list below the drawing, just the drawing at full width, and just the list, for buyers who already know their part numbers.

“Wide drawing” view: the exploded view takes the full width, the parts list sits below
Drawing wide — The drawing takes the full width, the parts list moves below it.

Zoom and Full Screen: Legible Down to the Circlip

Exploded views are dense. A single sheet often holds fifty or sixty positions, some just a few millimeters across. In the shop, the drawing therefore has to be zoomable: with the mouse wheel at a desk, with two fingers on a phone, or via a zoom bar with plus, minus and reset. Full screen puts the drawing over the whole page. The hotspots move with the zoom and stay on their part.

The precondition is an image with enough resolution. Rule of thumb: the smallest position number has to stay sharp when you zoom in. Techparts warns in the editor when an image is borderline for that, and states its original dimensions.

Zoomed into the drawing: radiator and hoses with individually numbered positions
Zoomed in — Scanned sheets stay legible down to the smallest circlip.

Multiple Sheets for One Assembly

A machine has a front and a back, a hydraulic part and an electrical part. Sometimes an assembly doesn't fit on one sheet. Then it carries several drawings, each with its own positions and its own parts list. A tab bar sits above the drawing; one click swaps drawing and list together, without reloading the page. If the bar gets too long, say on a phone, it automatically turns into a dropdown.

From Hotspot to Cart

The last step decides the sale: the part has to go from the drawing into the cart, with no detour through the product page. Techparts puts it straight into Shopify's own cart, from the row and from the card at the hotspot. The cart counter in the theme updates right away, and a confirmation states the quantity now in the cart. This is tested in eight themes, including Dawn and Horizon.

Cart with four spare parts added from the drawing
Cart straight from the drawing — Added right from the parts list, and Shopify's own cart updates immediately.

Adding Exploded Views to Shopify

Shopify itself doesn't come with anything for this. Product images are just images, and some themes do let you tag a handful of products on a lifestyle photo. But those sections aren't built for a bill of materials with sixty positions, quantities and OEM numbers.

With Techparts there are two approaches:

  1. On the product: The “Exploded View” block goes into the product template once and appears on every product that has a drawing. That fits home appliances, furniture, or individual machines.
  2. In the catalog: The "parts catalog" block goes on its own page. There, the drawings hang off the assemblies of a category tree; the article spare parts catalog in Shopify describes that path.

What that looks like in the shop is shown on the exploded views for Shopify page. Hotspots are created in the editor with a double-click on the drawing, or they come from an import. How that works with existing PDF catalogs is covered in the article digitizing a spare parts catalog.

Frequently Asked Questions

What file format does the drawing need?

An image file with enough resolution, such as PNG or JPG. It typically comes from a manufacturer catalog, your own engineering drawings, or a scan. From a PDF catalog, the PDF parser cuts out the sheet itself.

How high does the resolution need to be?

High enough that the smallest position number is still sharp when zoomed in. For scanned paper catalogs, 300 dpi is a good starting point. The editor flags it when an image is borderline for sharp zooming in the shop.

Am I allowed to show the manufacturer's drawings in my shop?

That's governed by your agreement with the manufacturer or supplier. Many provide catalogs to their dealers for exactly this purpose. Still, clarify the usage rights before you import an entire catalog.

Does the drawing also work on a smartphone?

Yes. You zoom with two fingers, and one finger pans the drawing once you've zoomed in. Otherwise the page keeps scrolling normally. Tabs turn into a dropdown when space is tight, and in full screen the hotspot panel can be docked at the bottom.

See your own catalog in your own shop.

Install Techparts, set up one assembly, view it in the shop. The free plan covers fifteen products with a drawing, with no time limit.