Avoiding Wrong Orders and Returns for Spare Parts
A wrongly ordered spare part costs twice over: shipping there and back, processing the return, and a machine that stays down longer than it needs to. On top of that, the customer would rather call next time than order themselves. Most wrong orders come down to a handful of recurring causes, and almost all of them can be caught in the shop before the order is placed.
The Most Common Causes of Wrong Orders
- Similar parts. Left and right, version A and B, two gaskets that only differ in inside diameter. In the product photo, they look identical.
- The wrong model year or the wrong version. The manufacturer changed the part during production, starting from a given model year or serial number. The customer orders for the right model, but the wrong version.
- The wrong quantity. The assembly needs four screws, but one gets ordered. Or a single part is ordered even though it only comes as a set.
- The incomplete order. The part itself is right, but the gasket that needs replacing along with it is missing. A second order and a second shipment follow.
- The outdated number. The customer orders using the number on the old part, but in the shop it's assigned to a different product, or no longer exists at all.
- Guesswork. Without an image or context, the customer picks whatever seems closest.
Each of these causes has a countermeasure in the shop.
Show the Part, Don't Describe It
The most effective countermeasure against similar parts is the exploded view. It shows the part in its place within the assembly, along with everything around it. The customer isn't comparing two product photos, but the drawing against their own machine. That the gasket sits to the left of the flange and not the right is obvious at a glance.
For that to work, the drawing also has to be legible in detail: with zoom, full screen, and position numbers that stay large enough. More on that in the article on interactive exploded views.
The Right Assembly for the Right Model
Against the wrong model year, a catalog that guides the customer by their model helps: make, model, model year, then assembly. Where parts differ by serial number, the tree gets its own level for that, such as “serial numbers”, or the hotspot carries a note.
Two tools keep the catalog accurate here:
- Link instead of copy. If two model years share the same assembly, both point to the same drawing. A correction then takes effect everywhere, and there's no outdated copy that someone forgot about.
- Copy where there are differences. If a model year differs, the drawing is copied along with its positions and adjusted. The original stays untouched.
Quantity and Notes at the Hotspot
Against wrong quantities and missing small parts, information right at the hotspot helps:
- Required quantity. Every hotspot carries the quantity actually used in the assembly. The quantity selector is pre-filled accordingly: someone who needs four screws orders four.
- Parts used more than once. If the same hotspot appears several times in the drawing, it's listed once and marked “4× in the drawing”.
- Note text. A free-text note per hotspot captures what otherwise only a specialist would know: “replace only together with gasket item 12”, “from serial number 40,000”, “for the hydraulic version, see sheet 2”.
Alternatives and Replaced Products
Against outdated numbers, upkeep helps, and it has to be easy. A hotspot can carry several products, such as different pack sizes or a successor alongside the original. The customer expands the alternatives and chooses.
If a supplier replaces a number, Techparts on the PRO plan searches for every occurrence of the old product, by product or by OEM number, and shows them before anything is changed. The product is then replaced across all drawings at once, or the new one is simply added alongside the old. Undoing it means running the same process with old and new swapped. How the old number still stays findable is covered in the article on searching by part number.
Availability Before Ordering
An order that later has to be cancelled because the part is missing is almost as annoying as a wrong order. The parts list therefore shows stock at every position ("In stock", "Out of stock", "Sold out") and the price, optionally with a compare-at price. The customer knows where they stand before clicking add to cart.
Taking the Load Off Support
The typical process without a catalog: the customer sends a photo, support looks up the part, replies with a number, the customer searches for that number in the shop and orders, hopefully the right thing. With a catalog, this becomes a single step. Every assembly has its own address in the shop, and support just sends the link. The customer lands directly in the right drawing and orders there themselves.
Wrong orders also arise from gaps in the catalog: a hotspot with no assigned product, a drawing with no image. The overview in Techparts counts exactly that, and one click takes you to the list of affected entries.
Checklist Against Wrong Orders
- Every assembly has an exploded view with legible position numbers.
- The customer reaches the assembly via make, model and model year.
- Differences by serial number appear in the tree or as a note at the hotspot.
- Every hotspot carries the required quantity.
- Parts that need to be replaced together are linked by a note.
- Replaced products are swapped in every drawing.
- Stock and price are visible before ordering.
- Support sends links to assemblies instead of SKUs.
Frequently Asked Questions
How do I measure whether wrong orders are going down?
Record the reason for every return; Shopify has its own return reasons for this. Compare the share of returns due to wrong parts before and after introducing the catalog, ideally for the assemblies that are already fully mapped.
Does the drawing also help customers who already know their part number?
Yes, as confirmation. Anyone who arrives via search lands in the drawing with the hotspot highlighted and can see whether the part matches what they have in front of them. Anyone who doesn't need the drawing can switch to the plain parts list.
What about parts that differ by serial number?
Two approaches: either the tree gets its own level for serial number ranges, with a separate drawing per range. Or the drawing stays shared, and the affected hotspots carry a note along with both products listed as alternatives.
Which plan do I need for this?
Drawing, quantities, notes, alternatives and stock display are included in every plan, even the free one. The parts catalog with model matching and replacing products across all drawings belong to PRO. The overview is under Plans.